Blackfire Scratch Resistant Clear Finishing Polish

Blackfire Scratch Resistant Clear Finishing Polish

Blackfire Scratch Resistant Clear Finishing Polish (BF-220) uses nano abrasives to remove 2500-3000 grit sanding marks on fresh paints and to correct mild imperfections on cured paints. These fine abrasives burnish the finish to an incredible gloss. Blackfire Scratch Resistant Clear Finishing Polish can be used to refine the paint after compounding or as a one-step shine enhancing polish.

Blackfire Scratch Resistant Clear Finishing Polish has a number of advantages such as:

• It will restore gloss and remove minor defects in nano, ceramic particle clear coats.
• It will restore gloss and remove minor defects in the new scratch-resistant clear coats.
• It can be applied by hand, dual action polisher or circular polisher. (Machine application is required for maximum defect removal in ceramic particle clear coats.)

Blackfire Scratch Resistant Clear Finishing Polish will remove any existing wax or sealant and burnish the finish to a mirror-like shine. Applied by machine, it will remove 2500 grit swirls, spots, and scratches without hazing the finish. It is, in a word, remarkable.

473ml / 16oz

Usage

Application by hand:

• Work on areas of 2 sq. ft., out of direct sunlight.
• For best results, apply with a Microfibre Applicator.
• Apply a quarter sized amount of polish to the pad.
• Mist the pad once with pad lubricant or water.
• Wipe polish over surface using short, firm, strokes until polish starts to dry.
• Allow a haze to form.
• Buff off residues by hand using a Microfibre Towel.

Application by DA polisher:

• Work on approximately 2 sq. ft. areas out of direct sunlight.
• Apply using a Lake Country CCS White or Green Foam Polishing Pad (or a gray finishing pad if you're looking for less cut).
• Mist pad once with Blackfire Advanced Foam Pad Conditioner.
• Apply an X line of polish on the pad.
• Using the foam pad, spread polish over the surface with the machine off. (This coats both the pad and the surface with polish.)
• Set the speed control between 4 and 5.
• Place foam pad on the paint and turn the polisher on.
• Work over the surface in an overlapping back and forth motion until polish starts to turn clear.
• Buff off residues by hand using a Microfibre Towel.

We always recommend you read the manufacturers instructions before use.

Delivery

International Delivery:

Detailed Clean are more than happy to ship internationally the Blackfire Scratch Resistant Clear Finishing Polish, for an accurate quote, add the item to your basket and then view the shopping cart where you can get an accurate shipping price based on the weight of the order.

Just some of the countries we deliver to are:
Austria, Belgium, Belarus, Bosnia and Hercegovina, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Georgia, Germany, Gibraltar, Greece, Greenland, Hungary, Iceland, Italy, Latvia, Lithuania, Liechtenstein, Luxembourg, Macedonia, Malta, Monaco, Montenegro, Moldova, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey, Ukraine

Australia, Argentina, Brazil, Canada, China, Chile, Colombia, Hong Kong, India, Indonesia, Israel, Japan, Malaysia, Mexico, New Zealand, Philippines, Qatar, Russia, Saudi Arabia, Singapore, South Africa, South Korea, Taiwan, Thailand, United Arab Emirates, United States of America, Uruguay.