Carbon Collective Hybrid SiO2 Shampoo

description

Carbon Collective Hybrid SiO2 Shampoo

Carbon Collective Hybrid SiO2 Ceramic Shampoo is a slick, pH neutral shampoo formulated to leave durable SiO2 protection on protected & unprotected finishes, boosting gloss, beading & hydrophobic behaviour.

• Slick pH neutral formula
• Leaves SiO2 protection on unprotected vehicles
• Restores and boosts ceramic coated finishes
• Cleaning and protecting in one easy step
• Deep cleaning
• removes bonded dirt from protected finishes
• High concentration – only 50ml needed per 20-litre bucket

Leaves behind a high gloss streak-free finish Originally formulated to deep clean Ceramic Coated finishes, our Hybrid Shampoo leaves behind an additional protective layer on the surface, extending the life of your ceramic coating.

Hybrid Shampoo’s deep cleaning properties safely lift bonded contamination from surfaces, restoring the ceramic coating’s protective properties whilst boosting gloss and beading. Although designed to maintain ceramic coated finishes, Hybrid Shampoo is perfect for unprotected vehicles as a quick and easy one-step product, offering impressive deep cleaning and instant protection.

The low foaming properties ensure easy rinsing, helping to prevent water spotting and reducing water usage. Hybrid Shampoo is a very high concentration product a minimum of 50ml is needed per 20-litre bucket, meaning ten washes from a single 500ml bottle. Compatible with our external sealants for layered protection, our SiO2 Ceramic Shampoo can be used in harmony with Speciale SiO2 Ceramic Detailer or our Hybrid Coating for increased gloss, durability, and protection.

usage

Bucket Application

Pour 50ml of product into the wash bucket and fill with 20-litres of warm water. (Optionally, add 10-20ml of Lusso Shampoo to increase foaming). Using one of our Wash Mitts, begin washing the vehicle from top to bottom in straight lines. Once the vehicle is clean, rinse vigorously until the water turns clear. Repeat the process for maximum durability, adding an extra layer of protection, increasing gloss and durability. Wash Mitt Application:

Pre-wash before application

Using the two bucket method, add 50ml of your chosen shampoo to one bucket, fill the other with clean water. Wash the car from top to bottom, front to back as you usually would (using the two bucket method). After the car is clean, apply a few drops of Hybrid Shampoo directly to the wet wash mitt or pad. Apply panel by panel, a reaction will begin to happen. Top-up the mitt with shampoo where required, repeat this process on the entire car. Once applied to the entire vehicle, rinse vigorously until the water turns clear. In warm conditions in direct sunlight panel temperatures can be high, we would suggest rinsing each panel straight after application.

Snow Foam Gun Application

Pre-wash before application, using our Ultimus or Satsuma Snow Foam. Using the two bucket method, add 50ml of your chosen shampoo to one bucket, fill the other with clean water. Wash the car from top to bottom, front to back as you usually would (using the two bucket method). After the car is clean, add 50ml of Hybrid Shampoo to the lance bottle and fill with warm water. Apply to the entire vehicle using the Snow Foam Lance. Using the wash-mitt from the wash bucket, wipe the car down panel by panel, rinsing the mitt in the rinse bucket. Once applied to the entire vehicle, rinse vigorously until the water turns clear.