CarPro Cquartz DLUX Kit

description

CarPro Cquartz DLUX Kit

CarPro DLUX long life trim coat was engineered specifically for coating plastics as well as rubber and metal. It can be used on any wheel finish including clear coated, chrome, aluminum, and plastic however I personally recommend CQuartz for use on paint and clear coats.

This coating is the pinnacle of Exterior Plastic protection and darkens the trim as well without leaving any slick greasy feel that washes off. DLUX has semi permanent chemical bonding to surface pores, We use different nano composition to bond hard to plastic surface and achieve thick layer coat.

On car wheels, DLUX will repel dirt and dust with very easy to clean brake dust. DLUX will protect from water spots as well, these will be easier to remove. - Restores faded trim to look like new. - Gloss effect and hydrophobic will last up to 1 year - Made from quality high grade organic silane. DLUX is a Silane-based glass coating, DLUX Contains more than 50% pure silica!

We have incorporated a totally different nano composition to bond hard to plastic surface and achieve a thick uniformed layer.

• Very easy to apply with great UV protection, on all exterior substrates.
• Can be used on textured or smooth plastic
• Average use for 4 wheels and plastic trim = 10-15ml.

The Cquartz DLUX kit contains:

• 1 CQUARTZ DLUX 30ml.
• 1 Blue Foam Block Applicator
• 4 4"x4" Suede MF applicators

usage

• Make sure the surface is cool and dry. (Do not apply to hot surfaces or in direct sun.)
• Scrub surface with an all purpose cleaner and or water spot remover, rinse clean, and allow to dry.
• Use ERASER to remove any residue left by the APC or oil film and wait until the cleaned area is completely dry.
• Wet the applicator with 5-6 drops of DLUX and spread evenly across the surface.
• Let cure 1 minute at 85 degrees F up to 10 minutes at 50 degrees F
• On textured plastic simply apply even and your finished
• On other surfaces like smooth plastic, or non porous surfaces use a clean auto detailing cloth or suede MF to wipe it off gently, in a circle motion until no marks left.
• Allow the surface to cure for 1-3 hours without any moisture on its surface.
• Completely cured with NO rain requires 24 hours. (Any water marks from rain must be wiped off during first 24Hrs as a precaution)

product video