Gtechniq EXOv4 Hybrid Coating

description

Gtechniq EXOv4 Hybrid Coating

Gtechniq EXOv4 is the newer version of Gtechniq EXOv3 the Ultra Durable Hybrid Coating is an ultra UV-protective and dirt repellent sealant. EXOv4 delivers a hard film that makes water-spots easy to remove, offers great resistance to all wash chemicals and can help withstand micro-marring. It produces a high-gloss, warm-looking, extreme hydrophobic finish.

The EXOv4 package includes:

• 1 x 30ml or 50ml EXOv4
• 1 x pair of nitrile gloves
• 1 x AP2 Ultra Soft Foam Filled Applicator
• 1 x Master Instruction Leaflet
• 1 x WS1 Gtechniq Window Sticker

Based on the next generation of inorganic-organic hybrid materials it embodies our goal to offer products that work harder and smarter meaning more time enjoying your car, boat, plane or RV and less time maintaining it. EXO delivers a consistent film that is more durable and resistant to road salt and wash chemicals than its predecessors.

Application is easy, with a slow flash-off time, giving more time to achieve a perfect finish. All of the above combined with the introduction of a good degree of swirl resistance means EXOv4 represents a major leap forward in Last Surface Protection (LSP) technology.

usage

• In addition to this kit you will need at least two Gtechniq MF1 ZeroR Microfibre Buff cloths
• Ensure that your vehicle is out of direct sunlight but warmer than 5c, is completely dry and will stay dry for at least 3 hours after application
• Remove all blemishes from your vehicle's paintwork
• Wipe down all surfaces using either a 1:3 mix of Isopropyl Alcohol and water or Gtechniq Panel Prep and a Gtechniq MF1 ZeroR Microfibre Buff Cloth (nb if you are applying over a freshly applied coating of C1 you do not need to do this step)
• Put on the nitrile gloves provided
• Fold the micro-suede cloth into a small square
• Tip several drops of EXOv3 onto your application pad
• Spread the coating over an entire panel ensuring full coverage
• With your first MF1 cloth folded twice to form a square, spread and remove most of the residue using a light touch to ensure you do not introduce any marring to your finish
• With your second folded cloth remove all remaining residues. We advise to move your head so that you get direct and oblique views of your finish to spot all residue and we recommend bright but flat lighting to make residue spotting easier
• Once you have finished coating your vehicle, repeat so that your vehicle is coated twice
• Allow to cure for at least 3 hours prior to allowing your vehicle to get wet
• For maintaing your finish we recommend hand washing your vehicle using a Gtechniq WM1 Australian Long Hair Merino Wash Mitt, Gtechniq G-Wash and a Gtechniq MF2 Zero Scratch Microfibre Drying Towel
• You will find that your vehicle is significantly easier to clean and whilst EXO v3 has significantly better resistance to caustic wash chemicals these chemicals will shorten the lifespan of any coating and are not recommended as part of your care routine
• EXOv3 can be over coated with other products but please note that if done you will get the surface performance of this product rather than those of EXOv3

product video