Nanolex Matte Si3d Set

description

Nanolex Matte Si3d Set

Nanolex Matte Si3d Set is specifically for matte finishes which tend to be sensitive and prone to marring, so a ceramic coating would be the ideal solution to help protect them from damage. However, Nanolex Matte Si3d Set is unlike the majority of ceramic coatings which have been designed with traditional gloss finishes in mind that aim to increase levels of shine and reflectivity rendering them unsuitable for satin matte finishes.

To fill this void in the market, Nanolex has developed Si3D Matte, a ceramic coating specifically designed to protect matte paint finishes without adding gloss.

This kit contains everything required for the application of this coating. Kit Contains:

• 1 x Nanolex EX (200 ml)
• 1 x Nanolex Si3D Matte (30ml or 50ml)
• 1 x Nanolex Si3D Applicator Block
• 1 x Nanolex Si3D Microfibre Applicator (Pack of 10)
• 2 x Nanolex Microfibre Buffing Towels
• 1 x Nanolex Nitrile Gloves (1 Pair)

usage

• Ensure vehicle is decontaminated, clean, dry & polished
• Prepare surfaces by wiping with Nanolex EX to remove polish or silicone residues
• Apply a few drops of Si3D Matte to a Nanolex Si3D Microfibre Applicator wrapped around a Si3D Applicator Block (for stability)
• Working on a small section at a time (40-50cm square), apply Si3D Matte using light pressure and a cross-hatching motion until the product disappears
• Buff immediately without allowing the coating to dry out
• Once the whole car is coated, allow to cure in a warm, dry environment away from the elements for at least 12 hours
• An infra-red lamp can be used to accelerate the hardening process
• Avoid washing the coating for a further 3 days
• 30ml is suitable for saloon cars & hatchbacks. For estate cars & SUVs, select 50ml

product video